Basic function introduction:
1. Detection of missing locks, floating locks and sliding teeth.
2. Double-station alternate work; greatly improve work efficiency.
3. The screws are automatically arranged, and the suction is synchronized.
4. The vacuum detection function ensures that the screw can be sucked every time before locking.
5. Work on high and low planes
6. Signal indication of working status.
7. Analysis ability: 0.01mm
8. File storage capacity: can store 999 files, more than 1000 points in a single file
9. Control mode: motion control card.
A: Step by step introduction
1: Electric screwdriver
Electric screwdrivers can be selected from brands such as Good Helper, Chilissu, HIOS, etc.
Brushless electric batch: 1. The commutation action is controlled by an electronic transistor, and the phase is relatively accurate.
2. Less electrical noise, high reliability, long life, not easy to get hot.
3. Suitable for high temperature environment and low maintenance cost.
B: Step-by-step introduction
2: Screw feeder
Screw supply machine: you can choose independent brands, Japanese HIOS, cache and other brands (suitable for 1--5M screws, suitable for screws of any material; flat, cross, triangle, plum blossom, hexagon socket, H nuts, etc. )
Disc screw feeder: 1. Rotary feeding is more efficient than linear reciprocating.
2. When distributing the material, if there is any obstacle, it will automatically return to the origin to ensure the accuracy of the reclaiming position.
3. Provide an external signal line, and the automation equipment can know whether there are screws at the reclaiming position according to the changed signal line.
C: Step-by-step introduction
3: Precision platform
Equipment advantages
1. It can lock the screws of products with different planes.
2. Vacuum detection function: The vacuum pressure detection switch accurately displays the suction and payment pressure value of each screw. When the pressure value is not reached, the screw will be sucked again to ensure that it falls in the middle to avoid screw leakage.
3. The simple servo system (stepping motor with signal feedback function) is used to ensure that there is signal synchronous feedback during high-speed operation, so as to avoid losing steps.
4. X, Y, Z use double guide rails on silver, and the bottom structure is tough and stable.
5. The columns on both sides are made of open-molded aluminum material, and the unique aluminum material through holes make it unnecessary to remove the shell when replacing the wire, which is convenient and beautiful.
6. This product can quickly eliminate screw failures. After the failure is eliminated, it can continue to operate directly at the original error point.
7. The system with screw sliding and floating lock detection function: when the screw is not properly screwed (missing lock, sliding teeth, floating lock), the system will automatically pause and alarm.
8. Double-platform operation, double-station cyclic operation, saving placement time and improving efficiency.
9. Single-chip motion control, through hand-held programming, easy to operate and easy to understand.
驅動方式
| 步進電機+皮帶傳送
|
電機控制軸數
| 4軸
|
行程X×Y×Z
| 540×330×80
mm
|
Shaft speed
| X axis | 0.1-800 mm/sec
|
Y axis | 0.1-800 mm/sec
|
Z axis | 0.1-400 mm/sec
|
Repeat position accuracy
| X axis | ±0.02 mm
|
Y axis | ±0.02 mm
|
Z axis | ±0.02 mm
|
Resolution | X axis | 0.01mm
|
Y axis | 0.01mm
|
Z axis | 0.01mm
|
File storage method | Memory storage |
File storage capacity | 999 programs can be stored, and a single program can store more than 1000 points |
Speed control | Automatic acceleration and deceleration processing with speed look-ahead |
Programmatically | Handheld teach programmer |
Load weight | 8KG
|
Body weight | about 89KG
|
Machine size W×D×H(mm) | 770×720×720mm
|
