Guangdong Qin-Tech ATM-A500 flat plate automatic auxiliary materials machine, is our company independent research and development production and sales of a fully automatic auxiliary materials machine equipment, 1.3 seconds can be attached to a repeatable accuracy of ±0.1mm, product length: 100 ~ 550mm, width: 50 ~ 140mm, with high speed, high precision characteristics, can greatly save labor.

Introduction of Equipment:

1. Equipment functions: automatic loading of products and automatic unloading after pasting of auxiliary materials;
2. Equipment compatible product size: length: 100 ~ 550mm, width: 50 ~ 140mm;
3. Auxiliary material size: Min:4*4 (mm) Max:30*40 (mm);
4. The equipment is equipped with two sets of CCD visual positioning to ensure the mounting accuracy of ±0.1mm;
5. Production efficiency: 1.3S/ stick one auxiliary material (excluding loading and unloading);
6. Feeding bin height capacity: 500mm, the maximum weight of the bin 120KG;
7. Lack of material reminding function, the equipment on the silo to remind the personnel to replace the product before the production is finished;
8. The software can be equipped with MES system, which can read the product QR code and upload it to the system for storage, record and share abnormal alarm, output information, beat and other information in equipment production, and ensure quality traceability.

Overall size drawing:

1. Height above ground of operation table: 950mm (operating height)
4. Power supply: 220V 50HZ
3. Access air source: clean air source ≥0.6MPa

Back feeding mechanism description:
1 The station is a feeding and synchronous feeding and unloading mechanism
2. When the product is moved to the feeding position after labeling, the feeding and unloading can be realized synchronously when the feeding mechanism drops one side of the sucker to take the product on the fixture and the other side of the sucker to take the product in the warehouse to move the feeding position
3. The loading and unloading platform adopts drawer moving mode, which can be pulled out manually for discharging and receiving materials, improving the operation convenience of operators.

Technological Process

Manually put the material into the storage bin → automatic feeding by the lifting mechanism of the bin → synchronous loading and loading mechanism take the material into the product fixture → Feidar label supply → Label labeling head take the picture with the camera at the bottom → head camera take the picture → label labeling head paste the label onto the product → complete the synchronous feeding and feeding of the fixture back to the feeding position → cycle